TM 9-2330-235-14&P
3-2.
SPECIFIC LUBRICATION INSTRUCTIONS (Con't).
WARNING
Wipe excess lubricant from the area of brakeshoe linings to avoid grease soaking the linings. If
brakeshoe linings become soaked, have Organizational Maintenance replace them. Failure to
follow this warning may cause brakes to malfunction, resulting In serious injury or death to
personnel.
d.
After lubrication, wipe off excess oil or grease to prevent accumulation of foreign matter.
3-3.
LUBRICATION UNDER UNUSUAL CONDITIONS.
a. Lubricate more frequently to compensate for abnormal or extreme conditions such as high or low
temperatures, prolonged periods of high-speed operations, continued operation in sand or dust, immersion in water, or
exposure to moisture. Any one of these conditions may cause contamination and quickly destroy protective qualities of
b.
Intervals maybe extended during inactive periods commensurate with adequate preservation.
c.
For lubrication instructions during continued operation below 0F (-180C), refer to FM 9-207.
d. After operation in muddy, sandy, or dusty conditions, clean and inspect all points of lubrication for fouled
lubricants. Change lubricants as required.
3-2
