TM 9-2330-235-14&P
NOTES:
1.
OIL CAN POINTS.
2.
M514.
Quarterly, or at interval specified,
inspect, and pack with GAA (TM 9-214).
lubricate handbrake assembly and linkage, handbrake
cable turnbuckles, receptacle cover hinge, traveling
3.
LEVELING JACKS. After lubrication, operate
lockpins, and toolbox locks and hinges.
leveling jacks up and down to distribute the GAA.
M390C.
Quarterly, or at interval specified,
4.
MASTER CYLINDER. Fill to within X in. (13
lubricate handbrake assembly and linkage, leveling jack
adjusting nut and swivel housing mating surfaces,
mm)
staybars, foot pad pins, inner tubes, retractable support
from top.
inner tube, spring-loaded handle, wheel assembly, and
hinges and brackets.
5.
SPRINGS (M390C). DO NOT lubricate.
3-6
