TM 9-2330-235-14&P
Table 3-1. Operator/Crew Troubleshooting (Con't).
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Step 2.
Check intervehicular cable and chassis wiring harness for proper connections.
Properly connect intervehicular cable and chassis wiring harness.
Step 3.
Check intervehicular cable for dirty, corroded, or damaged pins.
If intervehicular cable pins are dirty or corroded, clean pins (para 36).
If intervehicular cable pins are damaged, notify Organizational Maintenance.
Step 4.
Check chassis wiring harness for broken wires or insulation and other damage.
Notify Organizational Maintenance.
2.
ONE OR MORE LAMPS (BUT NOT ALL) WILL NOT LIGHT.
Step 1.
Check light assembly for defects or damage.
If light assembly is defective or damaged, notify Organizational Maintenance.
Step 2.
Check chassis wiring harness and taillight connectors for proper connection.
If chassis wiring harness and taillight connectors are not properly connected, disconnect and
connect properly.
Step 3.
Check chassis wiring harness for broken wires or insulation and other damage.
Notify Organizational Maintenance.
3.
DIM OR FLICKERING LAMPS.
Step 1.
Check for loose, dirty, or corroded terminals at taillight connectors.
Clean dirty or corroded terminals (para 3-6).
Step 2.
Check taillight for obvious defects or damage.
If light is defective or damaged, notify Organizational Maintenance.
Step 3.
Check intervehicular cable for dirty or corroded pins.
Clean dirty or corroded pins (para 3-6).
Step 4.
Check chassis wiring harness for broken wires or insulation and other damage.
Notify Organizational Maintenance.
3-9
