TM 9-2330-235-14&P
4-17.
REAR AXLE ASSEMBLY REPLACEMENT (M390C) (Con't).
12.
Disconnect two tubes (25) from connector (30) attached to axle (11).
13.
Disconnect hose (3) from connector (30).
14.
Disconnect two tubes (25) from connectors (26) attached to backing plates (24).
15.
Remove three screws (29), lockwashers (28), and clamps (27) securing tubes (25) to axle (11). Remove tubes.
Discard lockwashers.
16. Remove nut (33) securing connector (30) to axle (11). Remove connector.
17. Remove nut (32) and stud (31) from axle (11).
18. Remove 12 nuts (34) and lockwashers (35) from mounting screws (36) securing each backing plate (24) to axle
flange (37). Remove backing plates with brakeshoes and wheel cylinders as an assembly from axle (11). Discard
lockwashers.
TA704310
b.
INSTALLATION
1. Position backing plates (24), with attached brakeshoes and wheel cylinders, on axle flanges (37). Secure each
backing plate to axle flange with 12 mounting screws (36), new lockwashers (35), and nuts (34).
2. Install stud (31) in tapped hole in axle (11) and secure with nut (32).
3. Install connector (30) on stud (31) with nut (33).
4. Position two tubes (25) on axle and connect to connector (30).
5. Secure two tubes (25) to axle with three clamps (27), new lockwashers (28), and screws (29).
4-30
