TM 9-2330-235-14&P
4-26.
BRAKESHOE REPLACEMENT (M514) (Con't).
1. Position a C-clamp over ends of wheel cylinder (14) to retain cups and pistons In cylinder Remove brakeshoe
return spring (16).
2
Remove two nuts (26), lockwashers (25), and flatwashers (24) securing anchor pins (20) to backing plate (6).
Remove two anchor pins and anchor plate (19). Remove anchor pin bushings (21) Discard lockwashers
3. Remove two C-washers (18) and flatwashers (17) securing brakeshoes (15) to adjusting cam pins (8) Remove
two brakeshoes and flatwashers (9) from adjusting cam pins.
4 Remove cotter pin (10), straight pin (11), and disconnect handbrake cable clevis (12) from toggle link (13) Discard
cotter pin.
5 Remove cotter pin (3), spring (4), and guard (5) from toggle link (13).
Pull toggle link toward rear until free of
front slide guide (23) then pull outward and forward out of rear slide guide (7) Discard cotter pin
6 Remove wheel cylinder (14) (para 4-29).
7 Remove six nuts (1), lockwashers (2), and screws (22) securing backing plate (6) to suspension arm.
Remove backing plate. Discard lockwashers.
TA704316
4-52
