TM 9-2330-235-14&P
4-28.
MASTER CYLINDER REPLACEMENT (C
5. Remove reducer (5) and gasket (14) from
master cylinder (4). Discard gasket
6. Remove vent tube (2) from cap (13).
7. Remove cap (13) and spacer (12) from master
cylinder (4)
8. Remove boot (11) from master cylinder (4).
b.
INSTALLATION I
1. Install boot (11) on master cylinder (4).
2 Install spacer (12) and cap (13) on master
cylinder (4)
3. Install new gasket (14) and reducer (5) in master
cylinder (4)
4. Install vent tube (2) in cap (13).
5 Install hose (9) on vent tube (2) and tighten
clamp (1).
6 Install master cylinder (4) on bracket (3) and
airbrake chamber (10) with three new
lockwashers (8) and nuts (7).
7. Connect hose (6) to reducer (5).
FOLLOW-ON TASKS:
Bleed brakes (para 4-25).
TA505015
4-60
