TM 9-2330-235-14&P
4-48. RETRACTABLE SUPPORT ASSEMBLY MAINTENANCE (M514).
This Task Covers:
a. Removal
d. Assembly
b. Disassembly
e. Installation
c. Cleaning and Inspection
f. Adjustment
Initial Setup:
Equipment Conditions:
Materials/Parts:
Trailer parked on level surface with handbrakes
Grease (Item 7, Appendix E)
applied (para 2-2).
Rags (Item 12, Appendix E)
Dry cleaning solvent (Item 13, Appendix E)
Tools/Test Equipment:
One cotter pin
One lubrication fitting
General mechanic's tool kit
Three spring pins
Common no. 1 shop set
Four lockwashers
Floor jack
Two jackstands
References:
TM 9-214
a. REMOVAL
1. Raise front of trailer frame with a suitable floor jack until wheel (14) is off ground. Support frame with jackstands.
2. Remove four nuts (24), lockwashers (25), flatwashers (26), and screws (27) securing retractable support
assembly to frame. Remove retractable support assembly from frame. Discard lockwashers.
4-110
