TM 9-2330-235-14&P
4-58.
SPRINGS AND RADIUS RODS REPLACEMENT (M390C) (Con't).
3.
Loosen two nuts (5) at turnbuckle (6). Remove
turnbuckle from push-pull control assembly (7)
and rod (4). Repeat for other side of trailer.
4.
Place a suitable lifting device under front of
trailer. Raise retractable support assembly (para
5.
Remove locknut (12) and screw (17) from lower
hole in each spring hanger. Discard locknuts.
6.
Remove two setscrews (16) from roller pin (15)
at each spring hanger. Drive out roller pin and
remove two sleeve bearings (14) and bushing
(13).
4-147
