TM 9-2330-246-14
4-16. CIRCUIT BREAKER BOX, CONDUIT AND FITTINGS REPLACEMENT (M348A2H)
(Con't).
Pull wiring through conduit and nipples and remove from upper and lower circuit breaker boxes (5 and 10).
4.
Remove nut (28) and inner bondnut (27) from upper circuit breaker box (5) and nipple (25).
5.
Remove four screws (4), eight flatwashers (3), and four locknuts (2) from upper circuit breaker box (5). Remove
6.
upper circuit breaker box. Discard locknuts.
Remove elbow (30) from upper circuit breaker box (5).
7.
Remove nut (13) and inner bondnut (12) from elbow (11), Pull elbow out of lower circuit breaker box (10).
8.
Remove nut (16) and inner bondnut (15) from nipple (14). Pull nipple out of lower circuit breaker box (10).
9.
Remove nut (21) and inner bondnut (20) from nipple (18), Pull nipple out of lower circuit breaker box (10).
10.
Remove nut (22) and inner bondnut (23) from nipple (25). Remove nipple from lower circuit breaker box (10).
11.
Remove four screws (9), eight flatwashers (8), and four iocknuts (7) from lower circuit breaker box (10). Remove
12.
lower circuit breaker box. Discard locknuts.
Remove two outer bondnuts (24 and 26) from nipple (25).
13.
4-24
