TM 9-2330-246-14
4-70. WHEEL REPLACEMENT.
This Task Covers:
a.
Removal
b.
Installation
Initial Setup:
Equipment Conditions:
Tools/Test Equipment:
Brakes applied.
General mechanic's tool kit
Wheels chocked.
Floor jack
References:
TM 9-2610-200-14
REMOVAL
a.
NOTE
Hub studs and wheel nuts are marked Ron right wheel and L on left wheel. Nuts must be
turned in opposite direction of normal forward rotation of wheel to be loosened or
removed.
1.
Loosen, but do not remove, six wheel nuts (1),
2.
Position floor jack under axle (6) near wheels (2 and 4) to be removed and raise semitrailer until wheels are off
ground.
Remove six wheel nuts (1) and outer wheel (2) from wheel studs (5).
3.
4.
Remove six capnuts (3) and inner wheel (4) from wheel studs (5).
5.
Refer to TM 9-2610-200-14 for instructions on tire maintenance.
TA700271
4-171