TM 9-2330-246-14
4-92. DECONTAMINATION PORT REPLACEMENT (ALL EXCEPT XM1005 AND XM1007).
This Task Covers:
a.
Removal
b.
Installation
Initial Setup:
Materials/Parts:
Tools/Test Equipment:
Z Adhesive (Item 1, Appendix E)
General mechanic's tool kit
Dry cleaning solvent (Item 13, Appendix E)
Drill bit set
One gasket
Electric drill
Three Iockwashers
Rivet gun
Z Seventeen rivets
1.
Remove eight thumbscrews (17), cover (16), and gasket (15) from decontamination port housing (13).
2.
Remove eight screws (14). Remove decontamination port housing (13) and gasket (12).
From inside semitrailer, remove eight rivets (3) from retainer (2). Remove retainer and air vent housing (6) from
3.
door. Discard rivets.
4.
Remove sleeve spacer (1) from door.
Remove three nuts (1 1), screws (8), and Iockwashers (7). Remove air vent housing (6) from retainer (2). Discard
5.
Iockwashers.
TA700304
4-214
