TM 9-2330-246-14
4-94. EXHAUST DUCT AND COVER REPLACEMENT (M348A2K AND M348A2N).
This Task Covers:
c.
Installation
a.
Removal
b.
Cleaning and Inspection
Initial Setup:
Tools/Test Equipment:
Materials/Parts:
Adhesive (Item 2, Appendix E)
General mechanic's tool kit
. Adhesive (Item 4, Appendix E)
Drill bit set
Dry cleaning solvent (Item 13, Appendix E)
Electric drill
Four Iockwashers
Rivet gun
Eight gaskets
Z Twenty-seven rivets
NOTE
This procedure can be used for the two exhaust ducts mounted on the M348A2K and
M348A2N front doors and the two exhaust ducts mounted on the M348A2K rear panel.
1.
Remove four screws (6), plate (5), and shield (4) from door.
Remove four rivets (3) securing hinge (2) to adapter (l). Discard rivets.
2.
3.
Open cover (7) and remove eight rivets (9) securing frame (8) to adapter (1). Remove frame with cover (7) and
hinge (2) from door. Discard rivets.
TA700306
4-218
