TM 9-2330-246-14
4-95. INTAKE DUCT AND COVER REPLACEMENT (M348A2K AND M348A2N).
This Task Covers:
a.
Removal
c.
Installation
b.
Cleaning and Inspection
Initial Setup:
Materials/Parts:
Tools/Test Equipment:
General mechanic's tool kit
Adhesive (Item 4, Appendix E)
Drill bit set
Dry cleaning solvent (Item 13, Appendix E)
Electric drill
Four gaskets
Rivet gun
z Four Iockwashers
Z Thirty-one rivets
NOTE
This procedure can be used for the intake duct mounted on the M348A2K and
M348A2N front doors and the Intake duct mounted on the M348A2K rear panel.
1.
Remove 11 screws (4), plate (5) and shield (3) from door.
2.
Remove eight rivets (2) securing hinge (1) to door. Discard rivets.
3.
Open cover (6) and remove 12 rivets (8) securing frame (7) to door. Remove frame with cover and hinge (1) from
door. Discard rivets.
I
4-223
