TM 9-2330-247-14&P
4-47. DRAWBAR COUPLER (Con't)
ACTION
REMARKS
ITEM
LOCATION
Note position of drawbar coupler (5) for instal-
Frame (4)
Drawbar
a.
3.
coupler (5)
lation.
b. Using hammer and brass drift, tap out.
c. If drawbar coupler (5) does not come out, using
torch, heat frame (4) surrounding drawbar cou-
pler, then repeat step 3b.
INSTALLATION
Drawbar coupler
a.
Coat drawbar coupler journal with grease.
4.
Put in place and tap in with hammer.
b.
(5)
Drawbar
Washer (3)
Screw in and tighten using in. socket and handle
5.
and nut (2)
with
in. drive. Torque nut (2) to 400-450 Ib.-ft.
coupler (5)
(542-610 Nm) using torque wrench.
Ensure that hole for cotter pin (1) is open.
Put in place and bend using pliers.
Drawbar
Cotter pin (1)
6.
coupler (5)
and nut (2)
TASK ENDS HERE
4-107
