TM 9-2330-247-14&P
4-48.
RETRACTABLE SUPPORTS (Con't)
ACTION
LOCATION
ITEM
REMARKS
Wheel (10)
Two bearing
51.
Using cup puller/installer, put in place,
cups (19)
Wheel (10)
Two bearings (18)
52.
a. Lubricate (Chapter 3, Section l).
two bearing
b. Put in place.
cups (19)
Two bushings (17)
Two preformed
53.
Put in place.
packings (16)
Wheel (10)
54.
Two bushings
Put in place.
(17) and two
and two
preformed
bearings (18)
packings (16)
55.
Wheel (10) and
Two seals (15)
Using hammer, put in place.
two bushings (17)
56.
Wheel (10)
Tire (2) and tube
If dismounted, mount to wheel (TM 9-2610-200-14).
INSTALLATION
57.
Fork (7)
Put in place.
Wheel (10)
Fork (7) and
a.
Put in place with threads of square neck bolt (11)
58.
Square neck
wheel (10)
bolt (11)
going through square fork hole first.
b.
Tap with hammer.
59.
Nut (8)
a.
Square neck
in. socket, ratchet
Screw in and tighten using
handle with
in. drive, and
in. box-end
bolt (11)
wrench.
b.
Torque nut (8) to 140-150 Ib.-ft. (190-203 NZm)
using torque wrench.
Ensure that hole for cotter pin (9) is open.
Put in place and bend using slip-joint pliers.
60.
Square neck bolt
Cotter pin (9)
(11) and nut (8)
TA701115
4-116
