TM 9-2330-247-14&P
Section Xl. S P R I N G
MAINTENANCE
Page
Page
Springs . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Bumpers . . . . . . . . . . . . . . . . . . . . . . . . . . .
This Task Covers:
c.
Installation
Removal
a.
b. Inspection
Initial Setup:
Tools/Test Equipment:
Equipment Conditions:
Trailer unloaded.
Drift, brass, in.
Drift, brass, in.
Hammer, hand, ball-peen, 3 lb
Personnel Required: Two
Jack, dolly, hydraulic, 10 ton
Pliers, slip-joint
Punch, drive pin,
in.
Rule, steel, machinist's
Socket, in. drive,
in.
Trestle, motor vehicle, 10 ton
Wrench, adjustable, 10 in.
Wrench, pliers
Wrench, torque, 0250 Ib.-ft. range
ACTION
REMARKS
ITEM
LOCATION
NOTE
Both springs are replaced in the same way; left spring is shown.