TM 9-2330-251-14&P
4-20. INTERVEHICULAR CABLE REPLACEMENT.
This Task Covers:
Installation
b.
Removal
a.
Initial Setup:
Materials/Parts:
Equipment Conditions:
Intervehicular cable disconnected from towing
Marker tags (as required) (Item 11, Appendix E)
vehicle (para 2-8).
Eight Iockwashers
Tools/Test
Equipment:
General mechanic's tool kit
q
1.
Tag wires for installation if identification bands are missing or not legible.
Remove 4 screws (2), Iockwashers (1), and cover (3) from drawbar (4), Discard Iockwashers.
2.
Remove 6 connectors (10) from 2 clip assemblies (6). Disconnect connectors.
3.
Remove screw (9), Iockwasher (8), and terminal (7) from clip assembly (6). Discard Iockwasher.
4.
5.
Remove 2 screws (11), Iockwashers (12), and strap (13) from drawbar (4). Discard Iockwashers,
Remove nut (15), Iockwasher (14), screw (17), and clamp (16) from drawbar (4). Remove intervehicular
6.
cable (5). Discard Iockwashers,
Remove clamp (16) from intervehicular cable (5).
7.
b. INSTALLATION
1.
Install clamp (16) on intervehicular cable (5).
TA503906
4-20
