4-35. MASTER CYLINDER REPLACEMENT (M416A1).
This Task Covers:
General mechanic's tool kit
q Two locknuts
q Drain pan
A suitable container should be used to catch any draining brake fluid. Ensure that all
spills are cleaned up,
Loosen inverted nut (6) and disconnect tube
assembly (7) from master cylinder (5).
Remove 2 locknuts (1) and screws (2) securing
master cylinder (5) to channel assembly (3).
Remove 4 spacers (4) and master cylinder
from channel assembly. Discard locknuts.
Install master cylinder (5) and 4 spacers (4) in channel assembly (3) with 2 screws (2) and new locknuts
Connect tube assembly (7) to master cylinder (5) and tighten inverted nut (6).