TM 9-2330-251-14&P
4-42. LANDING LEG REPLACEMENT.
This Task Covers:
Installation
b.
Removal
a.
Initial Setup:
Tools/Test Equipment:
Materials/Parts:
General mechanic's tool kit
TWO locknuts
Floor jack
Two jackstands
Raise front of trailer and position 2 jackstands
1.
under framerails (1) at front crossmember (2).
Support front of trailer on jackstands.
Remove 2 locknuts (3) and screws (6) securing
2.
landing leg (5) to drawbar coupler bracket (4).
Remove landing leg. Discard locknuts.
1.
Install landing leg (5) on drawbar coupler bracket (4) with 2 screws (6) and new locknuts (3).
WARNING
Ensure that landing leg is locked in the down position before continuing with task.
Failure to follow this warning could cause trailer to fall, resulting in injury to
personnel or damage to equipment.
Ensure that landing leg (5) is locked in the down position (para 2-8).
2.
Raise front of trailer and remove 2 jackstands from framerails (1) at front crossmember (2). Rest weight
3.
of trailer on landing leg (5).
TA503954
4-77
