TM 9-2330-251-14&P
4-43. SPRING ASSEMBLY MAINTENANCE (Con't).
Inspect all parts for cracks, distortion, damaged threads, excessive corrosion, or other damage.
2.
Replace all damaged parts.
3.
1.
Install front bracket (14) on chassis (2) with 4 screws (17), new Iockwashers (19), and nuts (18).
2.
Repeat step 1 to install rear bracket (10) on chassis (2).
Install 2 retainers (23) and new bushings (22) on U-bolt (13).
1.
Install fitting (20) in bearing (21).
2.
Install U-bolt (13) on rear bracket (10) with bearing (21 ).
3.
Install fitting (11) in bearing (12).
1.
Use a floor jack to raise spring assembly (4)
2.
into position on U-bolt (1 3).
Secure spring assembly (4) to U-bolt (13) with
3.
bearing (1 2).
Install fitting (9) in bolt (8).
4.
5.
Secure spring assembly (4) to front bracket
(14) with bolt (8), nut (15), and new cotter pin
(16).
Lower floor jack and remove.
6.
TA503958
4-81
