TM 9-2330-285-14&P/TO 36A11-21-10-1
SERVICE UPON RECEIPT OF MATERIEL - CONTINUED
ACTION
ITEM
REMARKS
LOCATION
Drycleaning solvent PD-680 is both toxic and flammable.
Avoid prolonged breathing of vapors and avoid skin contact.
Use only in well ventilated area and keep away from open
flame. Flash point of solvent is 138F (58.8 C). Serious injury
or death could result.
Remove rust preventive compound with dry-
Coated exterior
3
cleaning solvent.
parts
a. Inspect for damage that may have occurred
Dolly set
4
during shipping.
b. If damage is found, submit DD Form 6,
Package Improvement Report.
5
Equipment packing
a. Check against equipment to see if shipment
is complete.
slip
b. Report all discrepancies in accordance
with instructions in TM 38-750.
PRELIMINARY SERVICING AND ADJUSTMENT OF EQUIPMENT
Perform the operator and organizational maintenance preventive maintenance checks and services
contained in chapters 2 and 4.
Lubricate all points as shown in the Lubrication Chart (page 4-2) regardless of interval.
Schedule the next preventive maintenance checks and services on DD Form 314, Preventive
Maintenance Schedule and Record.
Report all deficiencies on DA Form 2407 if the deficiencies appear to involve unsatisfactory
design.
Perform a break-in road test of 25 miles (40.23 km) on new or reconditioned materiel, or a sufficient
number of miles on used materiel to completely check operation.
