TM 9-2330-285-14&P/TO 36A11-21-10-1
S e c t i o n XII SUSPENSION SYSTEM MAINTENANCE
Page
Page
Shock Absorbers . . . . . . . . . . . . . . . . . . . . . . 4-152
Air Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-150
Air Mount Bumper . . . . . . . . . . . . . . . . . . . . . 4-151
AIR MOUNT
This task covers:
a. Removal (page 4-150)
b. Installation (page 4-150)
INITIAL SETUP
Tools
9/16-inch wrench
1 1/2-ton floor type jack
ACTION
ITEM
REMARKS
LOCATION
REMOVAL
Raise dolly set so that base of air mount (3)
1 Frame adapter (1)
Jack (2)
clears the axle beam (4).
Remove using a 9/16-inch wrench.
Two screws (6) and
2 Air mount (3) to
two washers (7)
rocker arm (5)
Remove from between rocker arm (5) and axle
Air mount (3)
3
beam (4).
INSTALLATION
Place in position.
4 Rocker arm (5)
Air mount (3)
Install using a 9/16-inch wrench.
Two screws (6) and
5 Rocker arm (5)
two washers (7)
to air mount (3)
Lower and remove.
Jack (2)
6 Frame adapter (1)
