TM 9-2330-285-14&P/TO 36A11-21-10-1
HYDRAULIC PUMP - CONTINUED
ACTION
ITEM
REMARKS
LOCATION
ASSEMBLY - CONTINUED
Two new balls
Put into position.
30 Pump body (1)
(2) and (3),
and new spring (4)
31
Put in using a flat-tip screwdriver.
Screw (5) and
washer (6)
New cylinder (7)
Put in using a 9/16-inch box wrench.
32
33 Pump cover (8)
New washer (9),
Put in using a flat-tip screwdriver.
new wiper (10),
nut (1 1), and
new gasket (12)
Put in position.
New gasket
34 Pump body (1)
(13) and pump
cover (8)
Six screws (14)
Screw in until flush.
35
Do not tighten at this time.
5-16
