TM 9-2330-285-14&P/TO 36A11-21 -10-1
HYDRAULIC PUMP - CONTINUED
ACTION
REMARKS
ITEM
LOCATION
ASSEMBLY - CONTINUED
Tighten to 20 lb ft (27.1 Nm).
Six screws (3)
36 Pump body (1) to
Use the indicated sequence.
pump cover (2)
Put in using a 5/8-inch box wrench.
Vent and filler
37 Pump cover (2)
plug (4)
Put in.
New piston (5)
38
a. Slide pin (7) into beam (6).
Beam (6) and two
39
b. Put beam (6) into position by hooking pin
pins (7) and (8)
(7) into slot in piston (5).
c. Aline holes and slide in pin (8).
Install using pliers.
Two new clips (9)
40
NOTE
FOLLOW-ON MAINTENANCE: Install hydraulic pump
TASK ENDS HERE
TA 221776
5-17
