TM 9-2330-287-14&P
WHEEL AND TIRE - CONTINUED
ACTION
REMARKS
ITEM
LOCATION
REMOVAL
NOTE
Hub studs and wheel nuts are marked R on right wheel and L on left wheel. Nuts must be
turned in opposite direction to normal forward rotation of wheel to be loosened.
Nuts (2)
Using socket and handle, loosen nuts (2).
Hub studs (1)
1.
Wheel (4)
Using hydraulic jack (5), raise.
Wheel axle (3)
2.
Using socket and handle, remove.
Nuts (2)
Hub studs (1)
3.
Remove.
Wheel (4)
Hub (6)
4.
INSTALLATION
Place on studs (1).
Wheel (4)
Hub (6)
5.
Using socket and handle, install and
Nuts (2)
Hub studs (1)
6.
tighten.
Use shown sequence.
Using jack (5), lower.
Wheel (4)
Wheel axle (3)
7.
Using socket and handle, retighten.
Nuts (2)
Hub studs (1)
8.
Nuts must be retightened and torqued
to 450 - 500 ft lb (610 - 678 NZm)
by organizational maintenance.
TASK ENDS HERE
TA224769
