TM 9-2330-287-14&P
MASTER CYLINDER - CONTINUED
ACTION
ITEM
REMARKS
LOCATION
REMOVAL
Vent tube (2)
Using 5/8- and 1-inch wrenches, remove.
1. Master cylinder (1)
Using 7/16- and 5/8-inch wrenches,
Line (3)
2.
remove.
Three nuts (5) and
Using 9/16-inch wrench, remove.
3. Mounting bracket (4)
three Iockwashers (6)
Remove.
Master cylinder (1)
4.
Brake air chamber will also be loose
from bracket.
INSTALLATION
Master cylinder (1)
Position on mounting bracket (4) and studs.
5. Mounting bracket (4)
Three nuts (5) and
Using 9/16-inch wrench, install.
6. Master cylinder (1)
three Iockwashers (6)
Line (3)
Using 7/16- and 5/8-inch wrenches,
7.
install.
Fill with brake fluid to 1/2 inch from top.
Master cylinder (1)
8.
Vent tube (2) and
Using 5/8- and 1-inch wrenches, install.
9. Master cylinder (1)
fitting (7)
