TM 9-2330-287-14&P
HUB AND DRUM REPLACEMENT - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
WHEEL BEARING ADJUSTMENT - CONTINUED
NOTE
If, in step 13, noise or movement is heard or felt, repeat that step.
14. Spindle (1)
Lockwasher (2) and
Using wheel-bearing socket, install.
locknut (3)
15. Locknut (3)
Lockwasher (2)
Using screwdriver, bend tab of Iockwasher
(2) down over flat of locknut (3).
16. Hub (4)
New gasket (5) and
Position, alining mounting holes.
hubcap (6)
Eight capscrews
17. Hubcap (6)
Using 3/4-inch socket, handle, and exten-
(7) and eight
sion, install.
Iockwashers (8)
NOTE
FOLLOW-ON MAINTENANCE:
1. Install wheel and tire (page 3-5).
2. Adjust brakes (page 4-50).
TASK ENDS HERE
4-90
