TM 9-2330-287-14&P
HUB AND DRUM REPAIR (M796A1) - CONTINUED
ACTION
ITEM
REMARKS
LOCATION
DISASSEMBLY
Six nuts (2)
Using 1 1/4-inch wrench, remove.
1. Hub(1)
Six ribbed bolts (3)
Using punch and hammer, remove.
2.
Hub (1)
Remove.
3. Adapter plate (7)
Twelve nuts (5)
Using 9/16-inch socket and handle,
4.
and twelve
remove.
Iockwashers (6)
Adapter plate (7)
Remove.
5.
Twelve ribbed
Using punch and hammer, remove ribbed
6.
bolts (8)
bolts (8) as required.
Two bearing
Using drift and hammer, remove.
7. Hub(1)
races (9)
Six ribbed
Using punch and hammer, remove bolts
8.
(10) as required.
bolts (10)
ASSEMBLY
Six ribbed
Using punch and hammer, install.
9. Hub(1)
bolts (10)
Two bearing
Using drift and hammer, install.
10.
races (9)
Adapter plate (7)
Position, alining mounting holes.
11. Brakedrum (4)
Twelve ribbed bolts
Using socket and handle, install,
12. Adapter plate (7)
Be sure the head of each ribbed bolt
(8), twelve nut
(8) is fully seated.
(5), and twelve
Iockwashers (6)
Brakedrum (4)
Position on hub (1) and aline mounting
13. Hub(1)
holes.
Six ribbed bolts (3)
Using wrench, install.
14.
and SIX nuts (2)