TM 9-2330-294-14
MAINTENANCE
INSTRUCTIONS
ORGANIZATIONAL
Section I. SERVICE UPON RECEIPT OF MATERIEL
4-1. Inspection and Servicing the Equipment
b. Specific Procedures.
(1) Perform the quarterly preventive main-
When new, used, or reconditioned materiel is first
received by the using organization, it is the
(2) Perform all lubrication indicated on the
responsibility of the officer in charge to determine
Lubrication Chart (figs. 3-1 and 3-2) regardless of
whether the materiel has been properly prepared for
interval.
service by the supplying organization and to be sure
(3) Schedule second quarterly preventive
it is in condition to perform its function. Whenever
maintenance service.
practicable, the operator, crew, or user will assist
(4) Perform a "break in" road test of not less
organizational maintenance personnel in the per-
than 25 miles on primary roads at speeds not to
formance of their services. Services to be performed
exceed 25 mph.
are listed below.
c. Correction of Deficiencies. Deficiencies
a. General. If any exterior surfaces are coated
disclosed during preliminary inspection and ser.
with rust-preventive compound, remove with dry-
vicing or during "break in" period will be corrected
cleaning solvent type II (SD-2). Read "Processing
by the using organization or supporting main-
and Reprocessing Record for Storage and Issue of
tenance. Deficiencies will be reported in accordance
Vehicles and Spare Engines" tag (DD form 1397)
with TM 38-750.
and follow all directions carefully.
Section II. REPAIR PARTS, SPECIAL TOOLS AND EQUIPMENT
replacements. Special tools for organizational
maintenance are listed in TM 9-2330-294-24P, which
General mechanic's tool sets and common tool sets
is the authority for requisitioning replacements.
required for maintenance on the semitrailer are
authorized by the Table of Allowances (TA) and the
4-4. Maintenance Repair Parts
Table of Organization and Equipment (TOE). Tools
Repair parts are supplied to organizational main-
and equipment should not be used for purposes other
tenance for the placement of parts that become worn,
than prescribed and, when not in use, should be
broken or otherwise unserviceable, provided the
properly stowed in the spaces or compartments
replacement of these parts is within the scope of
provided.
4-3. Special Tools and Equipment
Repair parts for the semitrailer, lowbed, heavy
equipment transporter, 60 ton, M747 are listed in
Certain tools and equipment specially designed for
TM 9-2330-294-24P, which is the authority for
organizational maintenance and repair of the
requesting replacements.
semitrailer are listed in table 4-1 for information
only. This list is not to be used for requisitioning