TM 9-2330-294-14
4-44. Air Reservoirs
b. Installation. Install reservoirs in reverse order
of removal.
(fig. 4-55 or 4-56)
Release
Reservoir.
c. Recharge
Fail-safe
a. Removal.
Recharge fail-safe release reservoir, through
(1) Repressurize air system (para 4-38).
washers securing valve to frame.
(2) Disconnct air lines.
d. Drain. Drain reservoirs of collected moisture
(3) Remove cap screws, lock washers and nuts
by opening drain cocks slightly on bottoms of
c o m p r e s s i n g reservoir support clamps. Free
reservoirs (fig. 2-9).
reservoir from clamps.
(4) If clamps are damaged, remove two cap
screws, lockwashers and nuts securing each pair of
clamps to frame channel and replace.
