TM 9-2330-297-14&P
FRONT HARNESS - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION - CONTINUED
8. Front
Grommet (1)
a. Install on front harness (2).
Crossmember
b. Using flat-tip screwdriver, install in
hole (3).
9. Chassis side
Receptacle (4)
a. Using flat-tip screwdriver, connect
rail
wires of front harness (2) with screws
(5) to their respective terminals by
color code.
b. Slide plastic sleeves (6) over termi-
nals (7).
c. Using electrical tape, wrap terminal end
of receptacle (4).
10.
Two screws (8)
Using flat-tip screwdriver, secure
receptacle (4).
11.
Main harness plug (9)
Push into receptacle (4).
12. Front
Receptacle
a. Tie guide string to receptacle harness
crossmember
harness (10)
(10) on resistor box-attaching end.
b. Using guide string, draw receptacle
harness (10) into chassis through holes
(11) and (12).
13.
Resistor box (13)
ceptacle harness (10) to their respective
terminals by color code.
14.
Two screws (14)
Using flat-tip screwdriver, secure resistor
box (13).
15.
Receptacle (15)
Using flat-tip screwdriver, connect wires
of receptacle harness (10) with screws (16)
to their respective terminals by color code.
4-40