TM 9-2330-297-14&P
RESISTORS - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION
3.
Resistors (3)
a. Stack new resistor (3) on resistor box
(1) using screws (5), spacers (7), and
nuts (6).
b. Using screwdriver and 318-inch box
wrench, tighten screws (5).
resistor (3).
NOTE
When installing 4-ohm resistors, be sure to solder jumper leads across their contacts.
d. Using soldering iron, solder jumper lead
(8) across resistor contact (9).
4. Chassis front
Resistor box (1)
a. Position resistor box (1) on chassis
crossmember
front crossmember.
b. Using screwdriver, install screws (2).
TASK ENDS HERE
TA223128
4-35
