TM 9-2330-297-14&P
AIR LINES, HOSES, AND FITTINGS - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
NOTE
The procedures given are typical for all air lines and fittings.
1.
Chassis side
Air lines (1)
a. Using 518-inch wrench, remove nuts (2)
rail
from fittings (3).
b. Remove line (1) from chassis side
rail (4).
2.
Airhoses (5)
a. Uncouple hoses (5) from quick dis-
connects (6) and (7).
b. Using 7/8-inch wrench, remove hoses
(5) from quick disconnect fittings
(8) and (9).
3.
Fittings (3),
a. Using adjustable wrench, remove elbow
quick disconnects
fittings (3) from nuts (2).
(6) and/or (7),
b. Using a 1-inch wrench, remove quick
jamnuts (10),
disconnects (6) and/or (7).
coupling (11) and
c. Using two 1-inch wrenches, remove
nipples (12)
jam nut (10), coupling (11), and
nipple (12).
4.
Chassis front
Gladhands (13),
a. Using adjustable wrench, remove glad-
crossmember
jamnuts (14),
hands (13) from nipple (15).
nipple (15) and
b. Using 1-inch wrench, remove nuts (13).
reducer (16)
c. Remove nipple (15) and reducer (16).
4-72