TM 9-2330-357-14&P
4-22. OUTRIGGER CONTROL PANEL MAINTENANCE (Con't).
k. OUTRIGGER CONTROL PANEL INSTALLATION
1.
Install wiring harness to back of outrigger
control panel plate (28) as tagged.
2.
Install connector (29) into outrigger control
box (6).
3.
Install shield (23) with four new lockwashers
(31), screws (32), and nuts (30).
4.
Install connector (25) into outrigger control
box (6).
5.
Install shield (22) with four new lockwashers
(21), screws (20), and nuts (24).
6.
Install outrigger control panel plate &(28) with
four new lockwashers (26) and screws (27).
I. LEVEL LIGHT INSTALLATION
1.
If removed, install lamp (11) into level light
(10).
2.
Install level light (10) to level light bracket (14)
with two new lockwashers (12) and screws
(13).
3.
Install level light bracket (14) to door (17) with
two new lockwashers (16) and screws (15).
4.
Connect connector (9) as tagged.
5.
Install terminal (18) with new lockwasher (19)
and screw (8).
6.
Close door (17).
4-30
