TM 9-2330-357-14&P
4-61. LEVELING DEVICE MAINTENANCE (Con't).
b. DISASSEMBLY
1. Remove three screws (6), lockwashers (7), and
level (5). Discard lockwashers.
2. Remove four screws (8) and retaining ring (12).
Lift out plate (9).
3. Remove four screws (11), block (14), and bearing
(13) from bracket (10).
c. CLEANING AND INSPECTION
WARNING
Dry cleaning solvent, P-D-680, is toxic and flammable. Always wear protective
goggles and gloves, and use only in a well-ventilated area. Avoid contact with skin,
eyes, and clothes, and DO NOT breathe vapors. DO NOT use near open flame or
excessive heat. The solvent's flash point is 100 -138 (38 -59C). If you become
F
F
C
dizzy while using cleaning solvent, Immediately get fresh air and medical help. If
solvent contacts eyes, Immediately wash your eyes and get medical aid.
1. Remove all buildup of dirt or grease by using a clean rag or medium bristle brush and dry cleaning solvent,
and allow to dry.
2. Inspect for loose, missing, or damaged hardware.
3. Inspect all metal parts for scratches, marred finish, cracks, rust, and corrosion.
TA706516
4-124
