TM 9-2330-357-14&P
4-61. LEVELING DEVICE MAINTENANCE (Con't).
d. ASSEMBLY
1. Set level (5) using outriggers (para 2-12) and procedures in either launch technical manual (TM 9-1440-
600-10) or in radar set technical manual (TM 9-1430-600-10).
2. Install block (14) and bearing (13) to bracket (10) with four screws (11).
3. Apply sealing compound to threads of four screws (8). Install and tighten screws halfway in plate (9).
4. Install plate (9) through hole in block (14) and bearing (13). Attach retaining ring (12). Fully tighten four
screws (8).
5. Install level (5) with three new lockwashers (7) and screws (6).
6. Adjust level (5) by tightening or loosening screws (6) until bubble centers.
e. INSTALLATION
1. Install leveling device (1) into outrigger control
screws (3).
2. Close outrigger control panel door (4).
TA706517
4-125