TM 9-2330-357-14&P
5-3. POWER SOURCE-TO-OUTRIGGER RELAY WIRING HARNESS REPLACEMENT.
This Task Covers:
a. Removal
b. Installation
Initial Setup:
Equipment Conditions:
Materials/Parts:
Slave cable disconnected from semitrailer (para 2-12).
Marker tags (Item 17, Appendix E)
Electrical shields removed, as required (para 4-28).
Tools/Test Equipment:
General mechanic's tool kit
a. REMOVAL
NOTE
All connectors and outrigger relay wiring harness should be tagged before removal.
1. Disconnect connector (1) from master relay box.
2. Disconnect four connectors (2) from four outrigger relay boxes.
3. Remove outrigger relay wiring harness (3) from semitrailer.
b. INSTALLATION
1. Install outrigger relay wiring harness (3) into semitrailer.
2. Connect four connectors (2) to four outrigger relay boxes.
3. Connect connector (1) to master relay box.
5-10
