TM 9-2330-357-14&P
(3) Recoverability Code. Recoverability codes are assigned to items to indicate the disposition
action on unserviceable Items. The recoverability coda is entered in the fifth position of the SMR code as
follows:
Code
Application/Explanation
Z
- Nonreparable item. When unservic eable, condemn and dispose of the
item at the level of maintenance shown in the ad position of the SMR
code.
O
- Reparable item. When uneconomically reparable, condemn and dis-
pose of the item at unit maintenance or aviation unit level.
F
- Reparable item. When uneconomically reparable, condemn and dis-
pose of the item at the direct support or aviation intermediate level.
H
- Reparable item. When uneconomically reparable, condemn and dis-
pose of the Rem at the general support level.
D
- Reparable item. When beyond lower level repair capability, return to de-
pot. Condemnation and disposal of item not authorized below depot
level.
L
- Reparable item. Condemnation and disposal of item not authorized bee
low specialized repair activity (SRA).
A
- Item requires special handling or condemnation procedures because of
specific reasons (e.g., precious metal content, high dollar value, critical
material, or hazardous material). Refer to appropriate manuals /direc-
tives for specif ic instructions.
c. CAGEG Column (3)1 . The Commercial and Goverment Entity (CAGE) Code (C) is a 5-digit
alphanumeric code which is used to identify the manufacturer, distributor, or Government agency,
etc., that supplies the item.
NOTE
When you use an NSN to requisition an Item, the Item you receive may have a different part
number from the part ordered.
d. PART NUMBER Column (4). Indicates the primary number used by the manufacturer (individual,
company, firm, corporation, or Government activity), which controls the design and characteristics of the item
by means of its engineering drawings, specifications standards, and inspection requirements to identify an item
or range of items.
e. DESCRIPTION AND USABLE ON CODE (UOC) [Column (5)]. This column includes the following
information:
(1)
The Federal item name and, when required, a minimum description to identify the Item.
(2)
Physical security classification. Not Applicable.
(3)
Items that are included in kits and sets are listed below the name o f the kit or set on Figure
KIT.
(4)
Spare/repair parts that make up an assembled item are listed immediately following the
assembled item line entry.
(5)
Part numbers for bulk materials are referenced in this column in the line item entry for the
item to be manufactured; fabricated.
(6)
When the item is not used with all serial numbers of the same model, the effective serial
numbers are shown on the last line(s) of the description (before UOC;. Not Applicable.
(7)
The usable on code, when applicable (see paragraph F-5, Special Information).
F-4
