TM9-2330-358-14&P
Operator Troubleshooting Table
Table 3-1.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
TIRES
EXCESSIVELY WORN, SCUFFED OR CUPPED TIRES.
1.
Step 1.
Check tire pressure.
If tire pressure is not 75 psi (517 kPa), inflate tires.
a.
If tire pressure is 75 psi (517 kPa), go to step 2.
b.
1.
EXCESSIVELY WORN, SCUFFED OR CUPPED TIRES - continued.
Check for loose, cracked or broken wheels.
Step 2.
If wheels are loose, tighten nuts.
a.
If wheel is cracked or broken, notify Organizational Maintenance.
b.
c.
If wheel is secure and not cracked or broken, go to step 3.
Check suspension system for damaged springs and loose or missing bolts
Step 3.
and nuts.
a.
If suspension is damaged or has loose or missing bolts and nuts,
notify Organizational Maintenance.
b.
If suspension system is not damaged and all hardware is complete
and secure, go to step 4.
Check tracking for indication of axle misalignment.
Step 4.
a.
If axle appears to be misaligned, notify Organizational Maintenance.
b.
If the above steps do not correct the malfunction, notify
Organizational Maintenance.
Section III.
MAINTENANCE PROCEDURES
Page
Air Hose Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-12
Air Reservoir . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-13
Electrical Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-10
Landing Gear Legs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-11
Tire Removal and Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-14
3-9
