TM9-2330-358-14&P
b.
Installation.
Wrap the threads of each fitting with teflon tape
before installation to assure a tight and secure fit.
(1) Install 900 elbow (15, fig. 4-34) in pipe cross (5).
(2) Install male connectors (13 and 14) in pipe cross (5).
(3) Install adapters (11) and tee (12) in multi-function valve (l).
(4) Install male connectors (8, 9 and 10) in multi-function valve (l).
(5) Install male adapter (7) and washer (6) on multi-function valve (l).
(6) Install multi-function valve (1) on mounting plate (4) and female pipe
cross (5).
(7) Secure multi-function valve (1) and mounting plate (4) to frame with two
screws (2) and locknuts (3).
(8) Connect air lines to multi-function valve (l).
(9) Close drain cocks.
(lo) Charge air brake system.
(11) Check for leaks.
TASK ENDS HERE
4-38.
AIR RESERVOIRS
This task covers:
Removal
Installation
INITIAL SETUP
Tools
Materials/Parts
General mechanics tool kit
Tags (item 15,
Equipment Condition
Drain cocks open (para. 3-8)
Emergency relay valve removed (M871 if applicable) (para. 4-34)
Multi-function valve removed (M871 if applicable) (para. 4-36)
4-65
