TM9-2330-358-14&P
Figure 4-33.
Multi-Function Valve (M871)
b.
Installation.
(1) Install nipple (5, fig. 4-33) to rear of the valve assembly (4).
Install
tee (3) to top port of valve.
(2) Install multi-function valve assembly (4) by rotating entire assembly
clockwise.
(3) Install two elbows (2) and tee (3).
(4) Connect eight air lines (1) per tagged identification.
(5) Close drain cock.
(6) Pressurize air brake system.
(7) Check for leaks (para. 4-30).
TASK ENDS HERE
4-37.
MULTI-FUNCTION VALVE (M871Al ONLY)
This task covers:
Remova1
Installation
4-63
