TM9-2330-358-14w
(3) Rotate the slack adjuster (4) out of the clevis (5) on the spring brake
chamber.
(4) Remove retaining ring (6) from end of camshaft (7).
(5) Using hammer and suitable drift, tap slack adjuster (4) lightly until it
comes off camshaft (7).
Figure 4-38.
Slack Adjuster
b.
Installation.
(1) Clean splines of camshaft (7, fig. 4-38).
(2) Place slack adjuster (4) in position on camshaft (7) and tap in place using
a hammer.
(3) Install retaining ring (6).
(4) Rotate slack adjuster (4) into clevis (5).
(5) Install clevis pin (2) and cotter pin (l).
(6) Close drain cocks.
(7) Adjust slack adjuster (para. 4-30).
TASK ENDS HERE
4-71
