TM 9-2330-371-14&P
ACTION
LOCATION
ITEM
REMARKs
INSTALLATION CONTINUED
15.
Ball/stud
Nut (11)
Screw onto ball/stud end (2) and tighten,
end (2)
using torque rod socket and handle.
16.
Nut(11)
Cotter pin (12)
Put into nut (11) and ball/stud end (2) and
bend down ends using pliers.
17.
Spring
SaddIe (14)
Put on spring assembly (13) and under
assembly (13)
U-bolts (15).
18.
TWO U-bolts (15)
Four nuts (16)
Tighten using 1 7/16-inch socket and
handle.
19.
Trunnion cross
Remove hydraulic jack (18).
tube (17)
TASK ENDS HERE
TA224341
5-41