TM9-2330-372-14&P
CHAPTER 3
OPERATOR MAINTENANCE
Section I. LUBRICATION INSTRUCTIONS
3-1. LUBRICATION INSTRUCTIONS.
NOTE
These instructions are mandatory.
a. General. Keep all lubricants in closed containers and store in a clean, dry place away from external heat. Keep
container covers clean and allow no dust, dirt, or other foreign material to mix with the lubricants. Keep all lubrication
equipment clean and ready for use.
b. Cleaning. Keep all external parts not requiring lubrication, free of lubricants. Before lubricating the equipment,
wipe all lubrication points free of dirt or grease. Clean all lubrication points after servicing to prevent accumulation of
foreign material.
c. Lubrication Points. Service the lubrication points at the proper interval as specified in the lubrication chart. The
intervals specified are based on operation under normal conditions. Modifications of the recommended interval s may be
required under unusual operating conditions.
3-2. LUBRICATION CHART.
a. For lubrication under normal conditions, refer to lubrication chart (fig. 3-1).
b. For lubrication below temperatures of 0 degrees F (-18 degrees C) refer to FM9-207.
c. For lubrication before and after fording, refer to TM 9-238.
d. After operation in dusty or sandy conditions, clean and inspect all lubrication points. Lubricate the trailer in
accordance with the lubrication chart.
3-1
