TM9-2330-372-14&P
TABLE 3-1. OPERATOR TROUBLESHOOTING TABLE-continued
Malfunction
Test or Inspection
Corrective Action
b. If cable is connected properly, proceed to Step 3.
Step 3.
Check intervehicular cable connectors for dirty, corroded, or damaged pins.
a. If connector pins are dirty or corroded, clean the pins (para. 3-6).
b. If connector pins are damaged, notify organizational maintenance.
c. If the above steps do not correct the malfunction, notify organizational maintenance.
2. ONE OR MORE LIGHTS (BUT NOT ALL) WILL NOT LIGHT.
Step 1.
Check composite light assembly for defects or damage.
a. If light assembly is defective or damaged, notify organizational maintenance.
b. If composite light assembly does not appear to be damaged, and malfunction still exists,
notify organizational maintenance.
Step 2.
Check wiring harness and taillight connectors for proper connection.
a. If wiring harness and taillight connectors are improperly connected, reconnect.
b. If connections are correct, notify organizational maintenance.
3. DIM OR FLICKERING LIGHTS.
Step 1.
Check for loose, dirty, or corroded terminals at taillight wiring harness (fig. 1-5).
a. If taillight wiring harness terminals are loose, dirty, or corroded, clean terminals and
reconnect.
b. If taillight wiring harness terminals are clean and intact, proceed to Step 2.
Step 2.
Check for loose, dirty, or corroded terminals at composite light assembly.
3-6