TM 9-2330-373-14 & P
4-34. AIR SUSPENSION SYSTEM (cont)
INSTALLATION OF AIR SPRING (cont)
8.
Place air spring assembly (8) on pad of
screws (11) and lock washers (10). Tighten to a
torque of 25 lb-ft (33.9 Nm) maximum.
9.
Depress air spring and guide upper studs into air
spring mounting plate (7). Secure with nuts (3
and 5) and lock washers (4 and 6).
10.
Reconnect air hose (2).
2.
Air hose
3.
Nut
4.
Lock washer
5.
Nut
6.
Lock washer
8.
Air spring
9.
10.
Washer
11.
Screw
11.
Reconnect height control valve linkage.
12.
Recheck for leaks at operating pressure of 65 psi (448.2 k pa).
13.
Remove blocking and jacking equipment.
REMOVAL OF AXLE CONNECTION COMPONENTS
1.
Remove all weight from suspension by blocking up semitrailer and jacking up axle.
2.
Exhaust all air from air springs by disconnecting linkage to both height control valves and rotating actuating arms
down.
TA 314817
4-97