TM9-2330-374-14&P
Section I.
LUBRICATIONl INSTRUCTIONS
Page
Lubrication Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
L u b r i c a t i o n I n s t r u c t i o n s . ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
These
instructions
are
mandatory.
a . General.
Keep all lubricants in closed containers and store in a clean, dry
place away from
external heat. Keep container covers clean and allow no dust, dirt,
or other foreign
material to mix with lubricants. Keep all lubrication equipment
clean and ready
for use.
b . Cleaning. Keep all external p a r t s , not requiring lubrication, free of
Before lubricating equipment, wipe all lubrication points free of dirt
lubricants.
a n d grease.
Clean all lubrication points after servicing to prevent accumulation of
foreign matter.
c . Lubrication Points. Service lubrication points at the proper intervals as
specified in lubrication chart. The intervals specified are based on operation
u n d e r n o r m a l c o n d i t i o n s . M o d i f i c a t i o n of recommended intervals may be required
under unusual operating conditions.
LUBRICATION CHART
a . For lubrication under normal conditions, refer to the lubrication chart on
the following page.
b.
For instructions on lubrication in weather below 0F (-18C), refer to FM9-
207.
--.
c
For lubrication before and after fording, refer to TM 9-238.
d. After operating in mud, dust, sand or other unusual conditions, clean and
i n s p e c t a l l l u b r i c a t i o n p o i n t s . Lubricate semitrailer in accordance with the
lubrication chart.