TM9-2330-374-14&P
Figure 4-27. Slack adjuster
b.
Installation.
(1) Clean splines of camshaft (5, figure 4-27).
( 2 ) Place slack adjuster (6) in position on camshaft and tap in place using a
hammer.
(3) Install retaining ring (4).
(4) Install clevis (3), clevis pin (2) and cotter pin (1).
(5) Adjust slack adjuster (para 4-30).
(6) Close drain cocks (para. 3-9).
INITIAL SETUP
Tools
Equipment Condition
General mechanics tool kit
D r a i n cocks open (para. 3-9)
Materials/Parts
Air hose coupling
C l e a n i n g solvent (PD-680) (Item 7, Appendix E)
C o t t o n rags (Item 6, Appendix E)
T e f l o n tape (Item 17, Appendix E)
