TM9-2330-374-14&P
(h) Install rods (22) and (23).
(i) Install center case (20) and secure with two washers and cotter pins.
(j) Install plate (21) and secure with four screws (8).
(k) Install panel (15) and secure with 33 screws (14).
(l) Install lock cover (11) (narrow panel) on inside of door. Install 24
screws (12) around edge of lock cover (11).
(m) Slide door handle (31) in position and secure with three screws (30).
(n) Slide handle (17) on shaft and install rollpin (16).
(2) Door holdback bracket replacement.
(a) Remove two screws (27, figure 4-50).
( b ) Remove door holdback bracket (28).
(c) Position new door holdback bracket (28) in place and secure with two
screws (27).
( 3 ) Ladder mount replacement.
( a ) Remove two cap nuts and ladder mount.
(b) Install new ladder mount and secure with two cap nuts.
T h e cap nuts attach to screws that are welded to the
door.
(4) Hinge pin replacement.
(a) Remove cotter pin (37, figure 4-50) and hinge pin (38).
(b) Install new hinge pin (38) and secure with cotter pin (37).
(5) Hinge replacement.
(a) Remove four cap nuts (34, figure 4-50).
(b) Remove defective hinge (35).
(c) Install new hinge (35) and secure with four cap nuts (34).
T h e cap nuts attach to screws that are welded to the
door.
4-85
