TM9-2330-374-14&P
RIGHT DOOR
INITIAL SETUP
Tools
General mechanics tool kit
Materials/Parts
A d h e s i v e (MIL-A-5092B, type I) (Item 9, Appendix E)
a.
Removal.
(1) Support door and remove three cotter pins (37,
f i g u r e 4-50) and hinge pins
(38).
(2) Remove door.
b.
Repair.
Repair is limited to the replacement of defective parts.
T h e right door does not have to be removed for any
(1) Door handle and lock plate assembly replacement.
Slide
handle
(a) Remove roll pin (16, figure 4-50) from door handle (17).
(17) off shaft.
(b) Remove three screws (30) that secure door handle (31). Slide off door
handle (31).
( c ) Remove 24 screws (12) from around edge of lock cover (11) (narrow panel)
o n i n s i d e o f d o o r . R e m o v e lock cover (11).
( d ) Remove 33 screws (14) from panel (15). Remove panel (15).
(e) Remove four screws (8) from plate (21). Remove plate (21).
(f) Remove two cotter pins and washers from center case (20). Remove center
case (20).
( g ) Remove rods (22) and (23).
It is not necessary to remove screws (13) or plate (24)
t o remove main lock.
